Setup and Printing to Shared Student Printers (Windows)

1️⃣ Register Your Student ID

1. Confirm you have your student ID.
2. Tap your ID on any shared printer below the screen where it says:
   “Tap ID Here”
3. On the screen, enter your DSU credentials:
   • Use your FULL DSU e-mail address
   • Enter the same password as MyDSU
4. Your ID is now registered in the system.

2️⃣ Install MobilityPrint on Your Computer

1. Make sure your PC is connected to DeSales Wi-Fi (NOT DeSales Guest Wi-Fi).
2. Go to: http://cvprint21:9163/setup
3. Follow the prompts to download and install MobilityPrint.
4. Make sure to check BOTH:
   • PawPrintBW
   • PawPrintColor
5. Continue following the installation prompts until complete.

3️⃣ Printing from Your PC

1. Open the document you want to print:
   • Example: File > Print > Choose Printer
2. Select the appropriate printer:
   • PawPrintBW – Black & white, any student printer on campus
   • PawPrintColor – Color printing, Trexler Library only

Note: Only use PawPrintColor for color pages at Trexler Library.

4️⃣ Releasing Your Print Job

1. After sending your print job to PawPrintBW or PawPrintColor, go to any shared printer.
2. Tap your ID and select “Print Release”.
3. You’ll see a list of all submitted print jobs.
4. Select the file you want and tap Print.
5. When finished, tap “Logout” (top right of the screen).

5️⃣ Student-Accessible Printer Locations

• Gambet Center – 1st Floor Southwest & Northeast Hallways
• Gambet Center – 2nd Floor Hallway
• Dooling Hall – Room 14 (PC Lab)
• Chapuis Hall – Back/Side Entrance
• Dorothy Day Student Union – Centaur Lounge
• Hurd Science Center – 2nd Floor Hallway
• Labuda Center – Green Room
• Trexler Library – 1st Floor Lobby & 2nd Floor Main Library
• Wills Hall – Room 120