Set Up Printing to Shared Student Printers (Chromebook)

Follow these steps to register your ID and start printing at DeSales University.

1. Register Your Student ID

1. Confirm you have your new ID.
2. Tap your ID on any shared printer below the screen where it says:
   “Tap ID Here.”
3. On the screen above, input your DSU credentials:
   • Use your FULL DSU email address
   • Use the same password you use for MyDSU
4. Your ID will now be registered in the system.
5. Add these print queues to your printer choices:
   • PawPrintBW (Black & White)
   • PawPrintColor (Color – Trexler Library Only)

2. Confirm Chromebook Connection

• Make sure your Chromebook is connected to DeSales Wi-Fi (not DeSales Guest Wi-Fi).

3. Set Up MobilityPrint

1. Go to the setup link: http://cvprint21:9163/setup
2. Click “Add MobilityPrint to Chrome”
   • Or directly from the Chrome Web Store: MobilityPrint Extension
3. When prompted, select both PawPrintBW and PawPrintColor.
4. You are now ready to print to your chosen queue.

4. Printing Instructions

1. Open the file you want to print.
2. Go to File → Print → Choose Printer
   • Select PawPrintBW or PawPrintColor (Trexler Library only).
3. Color printing is restricted to Trexler Library.
4. Black & white printing can be done at any student-accessible printer.

5. Release Your Print Job

1. Go to any shared printer.
2. Tap your ID.
3. Choose “Print Release”.
4. Select the print job(s) you want and tap “Print.”
5. After printing, tap “Logout” (top right of the screen).

6. Student-Accessible Printer Locations

• Gambet Center: Hallway 1st Floor SW & NE Areas, 2nd Floor
• Dooling Hall: Room 14 (PC Lab)
• Chapuis Hall: Back/Side Entrance
• Dorothy Day Student Union: Centaur Lounge
• Hurd Science Center: 2nd Floor Hallway
• Labuda Center: Green Room
• Trexler Library: 1st Floor Lobby & 2nd Floor Main Area
• Wills Hall: Room 120

Tip: Always log out after printing to protect your documents.